Hi,
this is the 1/72 Monogram F-4 C/D Phantom kit. The kit was built out of
the box. I added scratch build seatbelts which I made with masking tape.
Click on
images below to see larger images
Most
of the parts fit fine, but I had some troubles filling a gap after I glued
the air intakes to the side of the fuselage. I also had some troubles
gluing the tail wings. I used MM paints on my model. I used MM Dark Green
mixed with some drops of MM Medium Green for darker green. MM Medium green
with some OD Green for the medium green and MM DarkTan mixed with a
few drops of Sand and 3 of yellow. Also used Aluminum Alclad II and
Metalizer paint for the silver part on the tail wings.
Decals
were a pain, because they had too much clear film on it, so I had to cut as
close as possible to decal to avoid silvering. I used black and brown pastel
chalks to weather my model, and finally sealed it with Testors Dullcote.
Hope
you like it. Regards,
Franz Galli
Click on
images below to see larger images
|