This project was completed
in 2011, the first year that I came back to the scale model world after stop touching it for nearly 20 years. It started
when I found 2 pieces of fuselage of BAE Harrier scale 1:72 without any other part!! Well, what I had to do was to collect parts I have left from the old days. Here were parts that I intended to use for this project. A soft vinyl girl was the pilot for this project.
Click on
images below to see larger images
|
|
I actually got 2 wings of
F-5 in 1:48 scale, but didn’t want to do a symmetrical vehicle. So, I had these two wings on the same side and made another wing with plastic sheet with different shape on the other side. During the project, I also found the engine of Tamiya
A-10 scale in 1:48 without other parts (I remember I didn’t finish this plane 20 years ago). So I used one engine for the wing. The
rear engine was from F-16 classic Revel back to year’s 70. I cut into 3 pieces and set on the
rear of the vehicle.
The rest of the decorations were from many materials. The color was color spray, oil paint weathering without clear or matt coating. I did a little fun on this project by adding LED light and put on the shop board decorated with silicone and painted with oil paint. Here is the final result.
Hope you enjoy it. Thank you for watching.
Narin
Click on
images below to see larger images
|
|
|